Even complicated and confusing topics will be easily developed and covered if you request our help writing an essay. Place an order today!

We are working as a team and my part for the assignment is part C2 Civil (Structural and Geotechnical) Engineering Specifications only, e.g. size of tank, support system, pipe sizes etc. As a team we have selected site 3, Kaski, Pokhara in Nepal, the site needs to be considered when developing the design. so i need information about my part 

Part C2 – Civil (Structural and Geotechnical) Engineering Specifications

Civil (Structural and Geotechnical) calculations are required to show that your team’s proposed solution will meet the requirements as set out in the project brief. This will include design specifications and related calculations to the following areas:

 Size, shape and depth of any cut and fill (excavation and filling) work

 Wind pressure and forces and moments acting on both structures and foundations

 Preliminary sizing of related infrastructure for multi-use rainwater system including

o Diameter and thickness of pipelines

o Shape and dimensions of storage tanks

o Depth, shape, size and thickness of foundation and foundation material

 Shape, size, depth and material of potential retaining walls (if any)

 Shape, size and length of potential foundation drainage system (if any)

 Road pavement design and drainage system for any access road and associated structures and foundations (if any)

 Resistance of structures against sliding, differential settlement and overturning

In these areas, you should be able to demonstrate the basic knowledge on the analysis of loads and forces, preliminary design, selection of materials, and familiarise yourself on the different Australian design standards.

 Provision of a general site lay-out covering all aspects of the rainwater multi-use project showing locations and approximate dimensions of related engineering structures of the project.

  • Posted: 4 Years Ago
  • Budget: $20

We are working as a team and my part for the assignment is part C2 Civil (Structural and Geotechnical) Engineering Specifications only, e.g. size of tank, support system, pipe sizes etc. As a team we have selected site 3, Kaski, Pokhara in Nepal, the site needs to be considered when developing the design. so i need information about my part 

Part C2 – Civil (Structural and Geotechnical) Engineering Specifications

Civil (Structural and Geotechnical) calculations are required to show that your team’s proposed solution will meet the requirements as set out in the project brief. This will include design specifications and related calculations to the following areas:

 Size, shape and depth of any cut and fill (excavation and filling) work

 Wind pressure and forces and moments acting on both structures and foundations

 Preliminary sizing of related infrastructure for multi-use rainwater system including

o Diameter and thickness of pipelines

o Shape and dimensions of storage tanks

o Depth, shape, size and thickness of foundation and foundation material

 Shape, size, depth and material of potential retaining walls (if any)

 Shape, size and length of potential foundation drainage system (if any)

 Road pavement design and drainage system for any access road and associated structures and foundations (if any)

 Resistance of structures against sliding, differential settlement and overturning

In these areas, you should be able to demonstrate the basic knowledge on the analysis of loads and forces, preliminary design, selection of materials, and familiarise yourself on the different Australian design standards.

 Provision of a general site lay-out covering all aspects of the rainwater multi-use project showing locations and approximate dimensions of related engineering structures of the project.

  • Posted: 4 Years Ago
  • Budget: $20

We are working as a team and my part for the assignment is part C2 Civil (Structural and Geotechnical) Engineering Specifications only, e.g. size of tank, support system, pipe sizes etc. As a team we have selected site 3, Kaski, Pokhara in Nepal, the site needs to be considered when developing the design. so i need information about my part 

Part C2 – Civil (Structural and Geotechnical) Engineering Specifications

Civil (Structural and Geotechnical) calculations are required to show that your team’s proposed solution will meet the requirements as set out in the project brief. This will include design specifications and related calculations to the following areas:

 Size, shape and depth of any cut and fill (excavation and filling) work

 Wind pressure and forces and moments acting on both structures and foundations

 Preliminary sizing of related infrastructure for multi-use rainwater system including

o Diameter and thickness of pipelines

o Shape and dimensions of storage tanks

o Depth, shape, size and thickness of foundation and foundation material

 Shape, size, depth and material of potential retaining walls (if any)

 Shape, size and length of potential foundation drainage system (if any)

 Road pavement design and drainage system for any access road and associated structures and foundations (if any)

 Resistance of structures against sliding, differential settlement and overturning

In these areas, you should be able to demonstrate the basic knowledge on the analysis of loads and forces, preliminary design, selection of materials, and familiarise yourself on the different Australian design standards.

 Provision of a general site lay-out covering all aspects of the rainwater multi-use project showing locations and approximate dimensions of related engineering structures of the project.

  • Posted: 4 Years Ago
  • Budget: $20

We are working as a team and my part for the assignment is part C2 Civil (Structural and Geotechnical) Engineering Specifications only, e.g. size of tank, support system, pipe sizes etc. As a team we have selected site 3, Kaski, Pokhara in Nepal, the site needs to be considered when developing the design. so i need information about my part 

Part C2 – Civil (Structural and Geotechnical) Engineering Specifications

Civil (Structural and Geotechnical) calculations are required to show that your team’s proposed solution will meet the requirements as set out in the project brief. This will include design specifications and related calculations to the following areas:

 Size, shape and depth of any cut and fill (excavation and filling) work

 Wind pressure and forces and moments acting on both structures and foundations

 Preliminary sizing of related infrastructure for multi-use rainwater system including

o Diameter and thickness of pipelines

o Shape and dimensions of storage tanks

o Depth, shape, size and thickness of foundation and foundation material

 Shape, size, depth and material of potential retaining walls (if any)

 Shape, size and length of potential foundation drainage system (if any)

 Road pavement design and drainage system for any access road and associated structures and foundations (if any)

 Resistance of structures against sliding, differential settlement and overturning

In these areas, you should be able to demonstrate the basic knowledge on the analysis of loads and forces, preliminary design, selection of materials, and familiarise yourself on the different Australian design standards.

 Provision of a general site lay-out covering all aspects of the rainwater multi-use project showing locations and approximate dimensions of related engineering structures of the project.

  • Posted: 4 Years Ago
  • Budget: $20
  • Posted: 4 Years Ago
  • Posted: 
  • Budget: $20
  • Budget: 

    testimonials icon
    Chapter 8 assignments...
    testimonials icon
    Analyzing Financial Research FindingsResearch findings are very important because they provide you with knowledge that...
    testimonials icon
    hi need to make a presentation same like sample use only those resources which is mention in attached instructions file and i will send yo...
    testimonials icon
    /*! elementor - v3.6.5 - 27-04-2022 */ .elementor-heading-title{padding:0;margin:0;line-height:1}.elementor-widget-heading .elementor-heading...
    testimonials icon
    Title: Developing an Evaluation Plan Project instructions: Click here for more on this paper……. Click here to have a similar A+...
    testimonials icon
    I was assigned this question after finding the inverse of a function and decoding the message on my algebra homework....
    testimonials icon
    Considering the marketing plan for your chosen healthcare organization, construct a three- to four-page paper....
    testimonials icon
    A company just starting business made the following four inventory purchases in June:June 1 - 150 units - $390June 10 -...
    testimonials icon
    RUNNING HEAD: Worst Case Scenario1Worst Case ScenarioStudent NameInstitution AffiliationCourseDateWorst Case Scenario2Worst Case ScenarioAbstractI ha...
    testimonials icon
    Determine the primary manner in which ORION has increased your business knowledge in the related subject area.Discuss specific challe...

    Other samples, services and questions:

    Calculate Price

    When you use PaperHelp, you save one valuable — TIME

    You can spend it for more important things than paper writing.

    Approx. price
    $65
    Order a paper. Study better. Sleep tight. Calculate Price!
    Created with Sketch.
    Calculate Price
    Approx. price
    $65